Experiences

Industrial Effluent Treatment System

• One of the water pollution control equipment.
• Treated the industrial production effluent by using physical, chemical or biological treatment.
• The installation and design shall get written approval from Department of Environment.
• Monitoring for the system shall carry out accordingly to ensure the system effectiveness.
• On-line monitoring is recommended for performance monitoring purpose.

Scrubber System

• One of the air pollution control equipment.
• Install for absorb or suck out the chemical fume in certain area.
• The installation and design shall get written approval from Department of Environment.
• Monitoring for the system shall carry out accordingly to ensure the system effectiveness.

Local Exhaust Ventilation (LEV) System Monitoring

• Carried out by the DODH registered Hygiene Technician.
• The main objective of this monitoring is to ensure the effectiveness of the LEV system.
• A complete LEV system shall contain hood, ducting , with or without controlling equipment and chimney.
• Report will be prepare on every system that has been monitor and recommendation will be indicate if the system effectiveness is not satisfied.
• Monitoring shall carried out yearly follow the OSHA requirement.
• E.g.: Fume cupboard, Oven, etc.

Environmental Monitoring Total Suspended Particulate Monitoring

• Monitoring carried out at quarry area.
• Objective: To monitor the ambient air quality near by the quarry area.
• Testing carried out in lab.

Water Sample Analysis

• Water sample collected at discharge point, river or etc.
• Testing on parameters like pH, COD, BOD, SS, Oil & Grease, heavy metal and etc.

Boundary Noise Monitoring

• Monitoring carried out at boundary area of the building.
• Objective: To monitor the existing noise level to environment.
• Report will be prepared after the monitoring.

Chemical Health Risk Assessment (CHRA)

• Carried out by the DODH registered assessor.
• The main objective of this assessment is assess the health risk of the employee or person will expose to chemical when carry out their daily working task.
• Input: MSDS/ CSDS, interview employee/ person in-charge, site walk through, observation, evidence provided from organization management.
• Output: CHRA report which contain the action need to be taken if the existing control measures are in adequate.
• E.g.: Employees handling the chemical without wearing proper PPE.
• Action need to be taken: wearing the proper PPE that suggested in the report.

ISO Management System Certification

• Objective: To enhance systematic and efficient organization operation management system.
• Certification period: 3 – 6 months (depend on size of organization)
• E.g. : ISO 9001, ISO 14001, OHSAS, 18001, ISO/ IEC 17025, TS 16949, ISO 13485, ISO 22000 (HACCP), etc.

Reactor

• Education research equipment fabrication.
• Use for study purpose with flow in the gas and heating up to certain temperature.
• Customize product (based on customer requirement).

Air Pressure Jig

• Food quality assurance equipment.
• Monitor the jelly sealing by using air pressure.
• Digital display value, low noise equipment.

Laboratory Setting

• Customize the lab bench and other lab furniture to suit the laboratory requirements.
• Include all the safety elements such as eye wash, emergency shower, spill kit & etc.